欢迎来访济南共润科技有限公司官网!

济南共润科技有限公司

咨询服务热线
0531-88270327 13153168609
当前位置: 首页 - 新闻中心 >
新闻中心

直线导轨的组装方法您了解吗?

来源:http://www.jngongrun.com/ 日期:2020-05-05 发布人:admin

  直线导轨属于精密零件,所以在使用的需求相当谨慎的态度,即使高性能直线导轨的使用,如果使用不当,也不能达到预期的性能,并且容易损坏直线导轨!因此,在安装导轨时必须注意以下几点:

  Linear guide rail is a precision part, so it should be used with great care. Even if the high-performance linear guide rail is used improperly, it can not achieve the expected performance, and it is easy to damage the linear guide rail! Therefore, the following points must be paid attention to when installing the guide rail:
  A.可互换产品(即导轨与滑块可任意匹配的产品)的THK滑块以安装在临时轴上的形式提供。因此,在与直线导轨配合使用时,请注意。
导轨丝杠
  A. THK sliders of interchangeable products (i.e. products with any matching of guide rails and sliders) are provided in the form of temporary shafts. Therefore, please pay attention when using with the linear guide rail.
  B.若擅自拆装各部件,将导致各部件灰尘进入或组合精度下降。因此,如果没有必要,请不要随意拆卸。
  B. If the components are disassembled without permission, the dust of each component will enter or the combination accuracy will decrease. Therefore, if not necessary, please do not disassemble at will.
  C.有时只要导轨倾斜,THK滑块就会移动,所以这时要小心,不要让THK滑块从导轨上掉下来。
  C. Sometimes as long as the guide rail is inclined, THK slider will move, so be careful not to let THK slider fall off the guide rail.
  D.端盖为塑料材质。如果用力撞击或碰撞,它会被损坏,所以要注意。
  D. The end cover is made of plastic. If you hit or collide with force, it will be damaged, so pay attention.
  除此之外,我们还需要时刻保持导轨的清洁:
  In addition, we need to keep the guide rails clean at all times:
  在设备运行过程中,被加工工件的加工过程中会产生大量的腐蚀性粉尘和烟尘。基于这些烟雾和灰尘沉积表面的导轨和直线轴大量很长一段时间,它有一个伟大的对设备的加工精度的影响,并将表面形成腐蚀斑点的直线轴导轨,缩短设备的使用寿命。为了使机床工作正常稳定,保证产品的加工质量,要认真做好导轨、直轴的日常保养。注意:导轨清洗时请准备好干棉布和润滑油。雕刻机的导轨分为直线导轨、滚柱导轨。清洁直线导轨:首先将激光头移动到右侧(或左侧),找到直线导轨,用干棉布擦拭,直到尘埃是光明的,加一点润滑油(可以使用缝纫机油,不使用石油),将激光头左右慢慢推几次,这样石油可以均匀分布。清洁滚子导轨:将横梁移至内侧,打开机器两侧的端盖,找到导轨,用干棉布将导轨与滚子接触的地方擦拭干净,然后将横梁移至剩余的地方清洁。
  In the process of equipment operation, a large number of corrosive dust and dust will be produced during the processing of the processed workpiece. Based on these smoke and dust deposition surface of the guide rail and linear axis for a long time, it has a great impact on the machining accuracy of the equipment, and will form corrosion spots on the surface of the linear axis guide rail, shorten the service life of the equipment. In order to ensure the normal and stable operation of the machine tool and the processing quality of the products, the daily maintenance of the guide rail and the straight shaft should be done well. Note: please prepare dry cotton cloth and lubricating oil when cleaning the guide rail. The guide rail of engraving machine is divided into linear guide rail and roller guide rail. Clean the linear guide rail: first move the laser head to the right (or left), find the linear guide rail, wipe it with dry cotton cloth until the dust is bright, add a little lubricating oil (sewing oil can be used instead of oil), slowly push the laser head left and right several times, so that the stone oil can be evenly distributed. Clean the roller guide: move the crossbeam to the inside, open the end covers on both sides of the machine, find the guide rail, wipe the place where the guide rail contacts the roller with dry cotton cloth, and then move the crossbeam to the rest place for cleaning.
  以上是导轨丝杠制造商为大家介绍的相关内容,想要了解更多内容,欢迎访问网站:http://www.jngongrun.com
  These are the related contents introduced by the guide screw manufacturer. For more information, please visit the website: http://www.jgongrun.com

济南共润科技有限责任公司