欢迎来访济南共润科技有限公司网站!

济南共润科技有限公司

咨询服务热线
0531-88270327 13153168609
当前位置: 首页 - 新闻中心
新闻中心

直线导轨购买的优势体现哪些方面?

来源:http://www.jngongrun.com/ 日期:2020-11-24 发布人:

由于直线导轨以滚动方式摩擦,因此缩小这些间隙是提高精度的重要指标。以下是直线导轨制造商向您介绍的主要购买点:

Due to the friction of linear guide in rolling mode, reducing these gaps is an important index to improve the accuracy. The following are the main purchasing points introduced to you by the linear guide manufacturer:
传统的直线导轨不可避免地导致平台运动精度由于油腻的回流效应而变差,并且运动轨道接触面的润滑是由于运动过程中润滑不足造成的,严重影响了精度。滚动导轨的磨损非常小,因此机器可以长时间保持精度。
The traditional linear guideway inevitably leads to the poor motion accuracy of the platform due to the greasy backflow effect, and the lubrication of the contact surface of the moving track is caused by insufficient lubrication during the movement, which seriously affects the accuracy. The wear of the rolling guide is very small, so the machine can maintain the accuracy for a long time.
直线导轨的优势:
Advantages of linear guide:

它适用于高速运动,大大降低了机器所需的驱动马力。由于直线导轨移动,摩擦力非常小,床可以用较少的动力操作,特别是当床在常规的往返操作中工作时。可以显着降低机器的功率损耗。并且由于其摩擦产生的热量很小,它可以应用于吹瓶机高速运转。
It is suitable for high-speed movement and greatly reduces the driving horsepower required by the machine. Due to the movement of the linear guide, the friction force is very small, so the bed can be operated with less power, especially when the bed is working in the normal round-trip operation. It can significantly reduce the power loss of the machine. And because the heat generated by friction is very small, it can be used in the high-speed operation of bottle blowing machine.
它可以同时承受上,下,左,右方向的负载。由于直线导轨采用特殊的梁结构设计,可同时承受上,下,左,右方向的载荷。与直线导轨不同,可以在平行接触面的方向上承受的横向载荷很轻,这很容易引起机器。运行精度差。日本THK直线导轨提醒器:导轨的接触面是直的如果没有提供足够的润滑剂,会造成一些损坏。
It can bear the load of up, down, left and right at the same time. Because the linear guide adopts special beam structure design, it can bear the load of up, down, left and right directions at the same time. Different from the linear guideway, the lateral load that can be borne in the direction parallel to the contact surface is very light, which is easy to cause the machine. The operation accuracy is poor. Japanese THK linear guide reminder: the contact surface of the guide rail is straight, if not provided with enough lubricant, it will cause some damage.

济南共润科技有限责任公司