In most ancient equipment, there are a large number of linear guide sliders. This is based on the principle that the slider can move back and forth vividly in the linear guide. It is true that the overall activity track is fixed, and there will be lubricating oil, but because of the different use environment, the slider itself will have a certain life problem. Therefore, if the linear guide slider is damaged, is it maintenance or direct replacement?

1、滑块重要会呈现哪些问题

1. What are the main problems

因为设备、环境等存在着较大的差别性，也不能说滑块在利用进程中一定会呈现雷同或类似的故障，但大体上可能把这些故障或问题进行分成两个局部，一是滑块电机元件局部，二是导轨局部。在滑块电机元件中，存在着马达、弹簧、齿轮等多种小整机，很轻易呈现问题；在导轨局部上比方可能会因为生锈、变形等造成故障。

Because there are great differences in equipment and environment, it can not be said that the slider will present the same or similar faults in the process of using, but generally these faults or problems may be divided into two parts, one is the slider motor component part, the other is the guide rail part. In the slider motor components, there are motor, spring, gear and other small machine, it is easy to present problems; in the rail part, for example, it may cause failure due to rust, deformation and so on.

2、是抉择维修还是换新

2. Choice of maintenance or replacement

个别来说，因为大多数滑块体积不大，各种整机都是集成式的装置在里面，所以假如是其中的某一个或多少个整机呈现问题的话，到维修点可能维修，但假如是要害性的整机，可能维修的用度跟换新的差未几了。在大多数情况下，假如导轨不问题，可能直接调换新的滑块，简单便利，用度也不会太高。

Individually, because most of the sliders are small in size, and all kinds of complete machines are integrated devices inside, if one or more of them have problems, they may be repaired at the maintenance point. However, if they are critical complete machines, the cost of maintenance may be as good as that of replacement. In most cases, if the guide is not a problem, may directly replace the new slider, simple and convenient, the cost will not be too high.

3、假如换新，滑块高吗

3. If change new, is slider price high

用于不同设备的滑块，在上也有着较大的差别，比方用于注塑机上的滑块基本上10－20元就可能搞定，而对雕刻机上的滑块的就十分高了

For example, the price of the slider used in the injection molding machine is 10-20 yuan, while the price of the slider used in the engraving machine is very high