Ball screw is a compact part of machine tool. Therefore, when in use, we can ensure its normal use and service life only by paying close attention to many aspects. Here, we will learn about the precautions for the use of ball screw.

一、在使用之前，要对丝杠的润滑状态进行很好的检查，因为如果滚珠丝杠处于较差的润滑状态中，会在短时间内出现滚珠丝杠的使用的功能丧失的状况。也可以说因为磨损情况的严重的出现，从而使其功能丧失。

1、 Before use, the lubrication state of the ball screw should be well checked, because if the ball screw is in a poor lubrication state, the function of the ball screw will be lost in a short time. It can also be said that its function is lost due to serious wear.

二、一旦给滚珠丝杠上涂好润滑油之后，就要直接的进行使用，但是要注意的是在使用的过程中会有较多的灰尘吸附在上面，如果不及时的将这些灰尘清理干净，就会造成其他的使用的问题，这时候，正确的操作方法就是使用干净的麻木，然后在使用一些白煤油进行擦洗，之后，再在上面涂好润滑油，进行下一次的使用。再涂润滑油的时候，一定要注意不要出现混合使用润滑油的状况。

2、 Once the ball screw is coated with lubricating oil, it should be used directly. However, it should be noted that more dust will be adsorbed on it during use. If these dust are not cleaned in time, it will cause other use problems. At this time, the correct operation method is to use clean numbness, Then use some white coal oil for scrubbing, and then apply lubricating oil on it for the next use. When re applying lubricating oil, be sure not to mix lubricating oil.

三、在使用的过程中，不管出现什么样的使用问题，非的人员，一定不要对丝杠进行拆卸处理，因为操作不当的话，简单的就是灰尘会进入到丝杠内，从而使滚珠丝杠的使用精度受到影响。

3、 In the process of use, no matter what kind of use problems occur, non professional personnel must not disassemble the lead screw, because if the operation is improper, the simple thing is that dust will enter the lead screw, which will affect the use accuracy of the ball lead screw.

重新组装的丝杠一旦出现组装上的错误，那么这样的丝杠就失去了使用的价值。而对于出了问题的滚珠丝杠，正确的做法就是请的认识进行维修处理

Once the reassembled lead screw has an assembly error, such lead screw will lose its use value. For the ball screw with problems, the correct way is to ask professional knowledge for maintenance