What are the commonly used nuts of TBI ball screw? The commonly used role of TBI ball screw in our industry is: groove or ridge made of metal or other materials that can bear, fix, guide and reduce the friction of moving device or device. Longitudinal groove or ridge on the surface of guide rail, used to guide and fix mechanical parts, special equipment, instruments, etc. Guide rail, also known as slide rail, linear guide rail and linear guide rail, is used in the situation of linear reciprocating motion. It has higher rated load than linear bearing, and can bear certain torque, and can achieve high-precision linear motion under high load.

　　我们在使用螺杆的同时也要使用螺母:目前市场上常见的螺母有以下几种:

　　We need to use nuts as well as screws: at present, there are several common nuts on the market:

　　S型螺母:这种类型是由钢球滚压在螺钉和螺母之间的全槽内，然后通过环行器在两端的通路做回。循环模式类似于一个e螺母。这种类型的环行器的钢球将沿着螺纹的方向运行。采用钢球隔声如抗压设计，可运行过程中的噪音。此外，s型螺母的安装空间比其他类型的螺母更小，因此特别适合高速和轻负荷设计。

　　S-type nut: this type is rolled by a steel ball in the full groove between the screw and the nut, and then made back through the passage at both ends of the circulator. The cycle pattern is similar to an e nut. The ball of this type of circulator will run in the direction of the thread. The sound insulation of steel ball, such as compression design, can eliminate the noise during operation. In addition, s-nuts have smaller installation space than other types of nuts, so they are particularly suitable for high-speed and light load design.

　　U。I型螺母:这种类型是由钢球沿着内循环环行器的全槽，斜穿过螺旋齿的顶点，回到原点。这种类型的螺杆必须有少一端完全通过齿孔，适用于螺杆直径较小，采用金属环行器。

　　U. Type I nut: this type is made of steel ball passing through the vertex of spiral tooth obliquely along the full groove of internal circulation circulator and returning to the origin. This type of screw must have at least one end completely through the perforations, suitable for small screw diameter, using metal circulator.

　　K型螺母:该螺母法兰为四孔安装孔，适用于微型丝杠。循环原理与I型相同，但不同循环时，循环位置在同一角度键槽上!

　　K-type nut: the flange of the nut is a four hole mounting hole, which is suitable for micro lead screw. The circulation principle is the same as type I, but the circulation position is on the same angle keyway when the circulation is different!

　　E -螺母型:这种类型是外循环和内循环特点,球滚动的螺丝和螺母之间的槽,更后螺母的端盖循环器通道的返回孔螺母的身体,通常与多个卷球的外部循环流通,但更少的外部循环管。

　　E-nut type: this type is characterized by external circulation and internal circulation, the groove between the screw and nut for ball rolling, the return hole of the circulator channel of the end cover of the nut, and the body of the nut, which usually circulates with the external circulation of multiple rolling balls, but less external circulation pipes.

　　不同的螺母有不同的使用方法，所以我们应该更加注意螺杆各部分的作用!

　　Different nuts have different methods of use, so we should pay more attention to the role of each part of the screw!

　　以上是导轨丝杠制造商为大家介绍的相关内容，想要了解更多内容，欢迎访问网站：http://www.jngongrun.comThese are the related contents introduced by the guide screw manufacturer. For more information, please visit the website: http://www.jgongrun.com