直线导轨是人们常说的线性导轨，这样的机械使用部件属于精密的零件，因此，在使用的时候，稍有不慎，会造成零件的损坏，在生产操作的时候，一定要采取比较谨慎的生产态度，避免出现因为使用不正确而造成线性导轨的损坏的状况。

Linear guide rail is often said to be linear guide rail. Such mechanical components are precision parts. Therefore, when using, a little carelessness will cause damage to parts. In the production operation, we must adopt a more cautious attitude to avoid the damage of linear guide rail caused by incorrect use.

1、使用要求

1. Use requirements

对于使用的环境直线导轨也有着比较高的使用要求，在我们生产的环境中，不仅有看得见的灰尘，还存在一些看不见的灰尘，这些灰尘一旦落入到线性导轨中，会出现一些不良的使用反应，比如说提高导轨的磨损度，使机械的振动力量加大，再有是噪音声提高等，继而会引发出其他的使用的问题。

For the use environment, the linear guide rail also has higher requirements. In our production environment, there are not only visible dust, but also some invisible dust. Once these dust fall into the linear guide rail, there will be some adverse reactions, such as improving the wear degree of the guide rail, increasing the vibration force of the machinery, and increasing the noise, It will lead to other use problems.

2、安装事项

2. Installation matters

对于线性导轨的安装，也需要认真仔细，在安装的时候，不可以出现强力进行冲压的状况，也不可以使用重物对导轨进行安装和敲击，一旦出现安装不当的状况，要采取技术上的行为进行安装。

For the installation of linear guide rail, it is also necessary to be careful. During installation, it is not allowed to press forcefully or use heavy objects to install and knock the guide rail. In case of improper installation, technical actions should be taken for installation.

3、要避免出现锈蚀的状况

3. Corrosion should be avoided

要避免出现这样的使用状况，避免直接的使用双手取拿这样的配件，而正确的做法是使用前把自己的双手清洗干净，去除污渍和汗液，再有是可以再直线导轨上涂抹好一些矿物油脂，然后在进行其他方面的操作。尤其是到了潮湿的夏季，一定要做好防潮处理。=

To avoid such use, first of all, avoid directly using both hands to take such accessories, and the correct way is to clean your hands before use, remove stains and sweat, and then apply some mineral grease on the linear guide rail, and then carry out other operations. Especially in the humid summer, we must do a good job in moisture-proof treatment. =