Linear guide rail is also commonly known as linear guide rail. The application components of such mechanical equipment belong to fine parts. Therefore, in the case of application, a little inattention will lead to the damage of parts. In the case of actual operation of production and manufacturing, we must adopt a more cautious manufacturing mentality to avoid the damage of linear guide rail due to wrong application.

1、应用规定

1. Application regulations

针对应用的自然环境直线导轨也拥有较为高的应用规定，在大家生产制造的自然环境中，不但有看得清的尘土，还存有一些看不到的尘土，这种尘土一旦掉入到线性导轨中，会出現一些欠佳的应用反映，例如提升滑轨的磨坏度，使机械设备的震动能量增加，还有便是噪声声提升等，进而会引发出别的的应用的难题。

According to the natural environment of application, linear guide rail also has relatively high application requirements. In the natural environment of production and manufacturing, there are not only visible dust, but also some invisible dust. Once this dust falls into the linear guide rail, there will be some poor application reflection, such as improving the wear degree of the slide rail, increasing the vibration energy of mechanical equipment, and making it convenient It's noise and sound enhancement, which will lead to other application problems.

2、安裝事宜

2. Installation

针对线性导轨的安裝，也必须仔细认真，在安裝的情况下，不能出現力开展冲压模具的状况，也不能应用吊物对滑轨开展安裝和敲打，一旦出現安裝不善的状况，要采用技术性上的个人行为开展安裝。

For the installation of linear guide rail, we must also be careful. In the case of installation, it is not allowed to carry out the stamping die with super strength, and it is not allowed to use the lifting objects to carry out the installation and knocking on the slide rail. Once the installation is not good, we should use the technical personal behavior to carry out the installation.

3、要避免出现生锈的状况

3. Rust should be avoided

要避免出现那样的应用状况，防止立即的应用两手取拿那样的零配件，而恰当的作法便是应用前把自己的两手清理整洁，除去污垢和汗水，还有便是能够再直线导轨上擦抹好一些矿物质植物油脂，随后在开展别的层面的实际操作。尤其是来到湿冷的夏天，一定要搞好防水解决。

To avoid such application situation, first of all, it is necessary to prevent the immediate use of two hands to pick up such spare parts. The proper way is to clean up your hands before application, remove dirt and sweat, and then wipe some mineral vegetable oil on the linear guide rail, and then carry out the actual operation at other levels. Especially in the wet and cold summer, we must do a good job in waterproof.