Now, with the increasing demand for gongrun guide rail in the market, what should we do if there is a problem with the guide rail? Today, we Xiaobian will take us to have a brief chat.

检修拆卸下的导轨时，首要记录导轨外观，然后确认润滑剂的残存量，取样后，再清洗导轨。清洗剂一般运用的汽油、火油。

When repairing the removed guide rail, first record the appearance of the guide rail, then confirm the residual amount of lubricant, and then clean the guide rail after sampling. Gasoline and kerosene are generally used as cleaning agents.

拆下来的导轨的清洗，分粗洗和精洗，在容器内首要放上金属网，使直线导轨不直接触摸容器内的脏物。粗洗时，如果导轨带着脏物旋转，会损害直线导轨翻滚面，应该加以留意。在粗洗油中，运用刷子出去润滑脂、粘着物，基本洁净后，转入精洗。

The cleaning of the removed guide rail is divided into rough cleaning and fine cleaning. The metal mesh is first placed in the container so that the linear guide rail does not directly touch the dirt in the container. During rough cleaning, if the guide rail rotates with dirt, it will damage the rolling surface of the linear guide rail, which should be paid attention to. In the coarse washing oil, use the brush to remove the grease and adhesive. After it is basically clean, turn to fine washing.

1、在装置前咱们必修要做的就是清理机械装置面的毛边，脏物和机械外表的伤痕。

1. First of all, before the installation, what we have to do is to clean the rough edges, dirt and scars on the surface of the mechanical device.

2、咱们要把hiwin直线导轨的主轨轻放安置在床台上，运用侧向固定的螺丝或许其他的固定工具使hiwin直线导轨的主轨于侧向装置面轻轻的贴合。

2. We should gently place the main rail of HIWIN linear guide rail on the bed, and use lateral fixing screws or other fixing tools to make the main rail of HIWIN linear guide rail fit gently on the lateral device surface.

3、咱们要由的方位向两侧按照次序将hiwin直线滑轨定位的螺丝扫尾旋紧。使轨迹和装置面略微的贴合。次序要由滑轨中段开端往两头略微的旋紧这样能够得到较安稳的精度。Hiwin线性滑轨的基准面略微旋紧后，要加强滑轨侧向基准面的迫紧力，使hiwin直线导轨的主轨能够精确的贴合基准面。

3. We should tighten the positioning screws of HIWIN linear slide rail from the center to both sides in order. Make the track fit slightly with the device surface. The sequence should be slightly tightened from the middle of the slide rail to both ends, so as to obtain a more stable accuracy. After the datum plane of the HIWIN linear slide rail is slightly tightened, the tightening force of the lateral datum plane of the slide rail shall be strengthened so that the main rail of the HIWIN linear guide rail can accurately fit the datum plane.

4、然后要运用扭力扳手，按照渠道的材质选用锁紧扭矩将滑轨定位的螺丝慢慢旋紧。

4. Then use a torque wrench and select the locking torque according to the material of the channel to slowly tighten the positioning screw of the slide rail.

总之，共润导轨丝杠的使用和安装问题也会在我们日常工作中，多注意它的一些原理性的问题，相信我们会对它有越来越多的理解和应用。

In short, the use and installation of gongrun guide screw will also pay more attention to some of its principle problems in our daily work. I believe we will have more and more understanding and application of it.