欢迎来访济南共润科技有限公司网站!

济南共润科技有限公司

咨询服务热线
0531-88270327 13153168609
当前位置: 首页 - 新闻中心
新闻中心

直线导轨丝杠的性能特点和优点

来源:http://www.jngongrun.com/ 日期:2022-02-10 发布人:

从传统的的生产车间职工逐渐诠释成目前的全自动水流生产制造,加工工艺也获得了大大的提高。质量上去了,生产厂家的订单信息当然就增加了。据统计数控设备行业中,运用智能化系统比较显着。其占有了行为主体的影响力特性,而且使用了一部分的直线导轨做为传动系统零部件,那么其直线导轨特性特性及优势,直线导轨中间的交换?

From the traditional production workshop staff gradually interpreted as the current full-automatic water flow production and manufacturing, the processing technology has also been greatly improved. When the quality goes up, the order information of the manufacturer will certainly increase. According to statistics, the use of intelligent system is more significant in the NC equipment industry. It occupies the influence characteristics of the behavior subject, and uses part of the linear guide rail as the parts of the transmission system. Then its linear guide rail characteristics and advantages, the exchange between the linear guide rails?
一、自润式线性导轨特性
1、 Characteristics of self-lubricating linear guide rail
1、内建式免进气系统
1. Built in air free system
2、高精度、低摩擦阻力
2. High precision and low friction resistance
3、四方位等负载设计方案
3. Square position equal load design scheme
4、高挪动速率、低噪声
4. High moving speed and low noise
5、运作畅顺新式滚珠循环系统方法
5. New ball circulation system and method for smooth operation
6、全密闭式骨架密封
6. Fully enclosed skeleton seal
7、高刚度四排珠45夹角触碰
7. High stiffness four row beads 45 included angle touch
8、可交换式设计方案
8. Exchangeable design scheme
9、全球规范规格型号规格
9. Global specification model specification
10、产品
10. Energy saving and environmental protection products
二、四大优势
2、 Four advantages
1、免维护保养、低检修、不用润化管道系统软件与机器设备。
1. Maintenance free, low maintenance, no need to moisten the pipeline system software and machinery and equipment.
2、使用期限较长,长期性全自动保护路轨表层润滑脂膜维护。
2. Long service life, long-term automatic protection, and maintenance of lubricating grease film on rail surface.
3、大幅度节约润滑脂成本费。
3. Greatly save the cost of grease.
4、便于保持设备清理,无废成品油外露环境污染之处。
4. It is convenient to keep the equipment clean, and there is no exposed environmental pollution of waste product oil.
三、中间的交换
3、 Intermediate exchange
1、检查组成高度是不是同样
1. Check whether the composition height is the same
2、检查组合轴承组成长短是不是与旁物产生干预
2. Check whether the composition length of the combined bearing interferes with the surrounding objects
3、检查滑块金属材料本身长短是不是贴近
3. Check whether the length of the metal material of the sliding block is close to each other
4、检查滑块上的孔眼及孔位是不是同样
4. Check whether the hole and hole position on the sliding block are the same
5、检查滑轨的总宽是不是同样
5. Check whether the overall width of the slide rail is the same
6、检查滑轨的孔位是不是同样
6. Check whether the hole position of the slide rail is the same
7、检查动的孔大小是不是可以应用同样的固定不动螺钉
7. Check whether the same fixed screw can be applied to the size of the moving hole
8、滑轨与端距假如不对称,在购买时请尽量表明。
8. If the distance between the slide rail and the end is asymmetric, please try to indicate it when purchasing.

济南共润科技有限责任公司