欢迎来访济南共润科技有限公司官网!

济南共润科技有限公司

咨询服务热线
0531-88270327 13153168609
当前位置: 首页 - 新闻中心 >
新闻中心

导轨生锈怎么进行保养?

来源:http://www.jngongrun.com/ 日期:2022-02-24 发布人:gongrun

导轨作为金属材料,很容易生锈,而生锈了之后就很难养护,那么我们应该怎么办呢?以下是一些关于导轨生锈养护的小技巧,希望能够给您提供参考。

As a metal material, the guide rail is easy to rust, and it is difficult to maintain after rust, so what should we do? The following are some tips about the rust maintenance of guide rail, hoping to provide you with reference.
1、让停机时刻大幅度的缩短,使直线铁轨时刻处在行进与劳作的状态下,通过提高使用频率与效率来防止生锈。
1. The shutdown time can be greatly shortened, so that the linear rail is in the state of travel and work at all times, and rust can be prevented by improving the use frequency and efficiency.
2、如果能够严格的控制直线导轨的纯量那就再好不过了,只要纯量在规定范围之内,使用周期一般都是比较长的。同时如果能够减少噪声对直线导轨的干扰。
2. If we can strictly control the purity of the linear guide rail, it would be better. As long as the purity is within the specified range, the service cycle is generally relatively long. At the same time, if the interference of noise to the linear guide rail can be reduced.
3、在高速环境下工作的时候,要尽量让电机温升速度降低,也不要让电机出现甩油的情况,如果能使功耗下降,给予电机保护那就再好不过了。
3. When working in a high-speed environment, try to reduce the temperature rise speed of the motor, and don't let the motor throw oil. If you can reduce the power consumption and protect the motor, it's best.
4、如果想对其进行清洁的话,那么拆下来的组件就要尽量的分类开来,因为清洁不同的组件有细清洁与粗清洁的不同方式,同时还要注意,不要将直线导轨离散的放在容器内,要先用金属网作为缓冲,这样可以使组件不接触容器内不干净的物质。
4. If you want to clean it, the disassembled components should be classified as far as possible, because different components can be cleaned in different ways of fine cleaning and coarse cleaning. At the same time, pay attention not to put the linear guide rail discretely in the container, but use the metal mesh as a buffer first, so that the components will not contact the unclean substances in the container.
5、如果是在低温下工作,那么如果能够提前保证直线导轨启动的灵性和工作的灵性就非常好了,同时还要在低温环境下尽量使输出功率在小的程度上维持。
5. If you work at low temperature, it would be very good if you can ensure the starting spirit and working spirit of the linear guide rail in advance. At the same time, try to maintain the output power to a small extent in the low temperature environment.
6、使用的时候要尽量保持环境干净,如果周围能够做到干净清洁,让细小的灰尘不进入直线导轨附近的空间,那么就能在很大程度上降低磨损概率,还能减少震动及噪声。总之,直线导轨的养护需要耐心与坚持,做到上述几点就能很好的防止生锈,也能更好的起到养护效果。
6. When using, try to keep the environment clean. If the surroundings can be clean and clean so that small dust does not enter the space near the linear guide rail, the wear probability can be reduced to a great extent, and vibration and noise can be reduced. In short, the maintenance of linear guide rail needs patience and persistence. The above points can not only prevent rust, but also play a better maintenance effect.

济南共润科技有限责任公司