The installation method of linear guide rail is very important! Before installing the linear guide rail, the rough edges, dirt and surface scars on the mechanical installation surface need to be removed. The linear slide rails are coated with antirust oil before formal installation. Before installation, please clean the datum plane with cleaning oil before installation. Generally, the datum plane is easy to rust after cleaning the antirust oil, so it is recommended to apply lubricating oil for main shaft with low viscosity.

2、将主轨轻轻安置在床台上，使用侧向固定螺丝或其他固定治具使线轨与侧向安装面轻轻贴合。安装使用前要确认螺丝孔是否吻合，假设底座加工孔不吻合又强行锁紧螺栓，会大大影响到组合精度与使用品质。

2. Gently place the main rail on the bed, and use the lateral fixing screw or other fixing fixture to gently fit the line rail with the lateral mounting surface. Before installation and use, it is necessary to confirm whether the screw holes are consistent. If the processed holes of the base are not consistent, the bolt will be forcibly locked, which will greatly affect the combination accuracy and use quality.

3、由远端向近端按顺序将滑轨的定位螺丝稍微旋紧，使轨道与垂直安装面稍微贴合。垂直基准面稍微旋紧后，加强侧向基准面的锁紧力，使主轨可以确实贴合侧向基准面。

3. Tighten the set screws of the slide rail slightly from the far end to the near end in order to make the rail fit slightly with the vertical mounting surface. After the vertical datum is slightly tightened, strengthen the locking force of the lateral datum, so that the main rail can indeed fit the lateral datum.

4、使用扭力扳手，依照各种材质锁紧扭矩将滑轨之定位螺丝慢慢旋紧。安装滑轨时请按照平台材质及固定螺丝的型号选用锁紧扭矩，请使用扭力扳手将滑轨螺栓慢慢迫紧。

4. Use a torque wrench to slowly tighten the set screw of the slide rail according to the locking torque of various materials. When installing the slide rail, please select the locking torque according to the platform material and the model of fixing screws, and use a torque wrench to slowly tighten the slide rail bolts.

5、使用相同安装方式安装副轨，注意滑座安装上线性滑轨后，后续许多附属件由于安装空间有限无法安装，需要于此阶段将所须附件一并安装。

5. Use the same installation method to install the auxiliary rail. Note that after the linear slide rail is installed on the sliding seat, many subsequent accessories cannot be installed due to the limited installation space, so the required accessories need to be installed at this stage.

6、直线导轨轻轻安置移动平台到主轨与副轨的滑座上。

6. The linear guide rail gently places the moving platform on the sliding seats of the main rail and auxiliary rail.

7、先锁紧移动平台上的侧向迫紧螺丝，安装定位后将在依照下列顺序进行。

7. First lock the lateral tightening screws on the mobile platform, and after installation and positioning, it will be carried out in the following order.

以上就是为大家介绍的有导轨丝杠的详细介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.jngongrun.com

The above is the detailed introduction of guide rail and lead screw. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.jngongrun.com