伴随着精密传动配件直线导轨在自动化技能行业的发展趋势，掌握一些直线导轨常见疑难问题是非常重要的，掌握越多有关直线导轨的知识，有益于我们在应对直线导轨，碰到难题时能得到及时、有效的处理，以便更好的使用直线导轨。下面导轨丝杠厂家来为您讲解下直线导轨运用常见问题汇总。

With the development trend of linear guide rail of precision transmission accessories in the automation technology industry, it is very important to master some common difficult problems of linear guide rail. Mastering more professional knowledge about linear guide rail will help us deal with linear guide rail in a timely and effective manner when we encounter problems, so as to better use linear guide rail. The guide rail lead screw manufacturer will explain to you the summary of common problems in the use of linear guide rail.

直线导轨运用常见问题点：

Common problems in the application of linear guide rail:

1、运作一段时间之后，可能会发现直线导轨的轨迹有印压痕，而且滑块钢珠开裂，这是什么原因？

1. After operating for a period of time, it may be found that the track of the linear guide rail has imprints, and the slide steel ball is cracked. What is the reason?

一般是因为负荷过大，钢珠离开轨迹，造成钢珠开裂导致轨迹持续损害。这种情况可以考虑拆换大一级的滑块，比如20的，更换成25的，或者增加滑块数量，降低外部荷载，改变安裝办法下降一侧承受能力情况。倘若来源于光滑的原因，可以考虑选用另一种润滑油，增加润滑度，减小润化间距。必须经常查看有没有脏东西进到滑轨，若有脏东西进入就需要改进密封性零配件，或者增加防尘配件。

It is generally because the load is too large and the steel ball leaves the track, causing the steel ball to crack and cause continuous damage to the track. In this case, it can be considered to replace the sliders of a higher level, such as 20 and 25, or increase the number of sliders, reduce the external load, and change the installation method to reduce the bearing capacity of one side. If it comes from the reason of smoothness, another lubricating oil can be considered to increase the degree of lubrication and reduce the wetting distance. It is necessary to check whether there is dirt entering the slide rail. If there is dirt entering, it is necessary to improve the sealing parts or add dust-proof parts.

2、滑块运作一段时间后会出現钢珠掉出来的情况是为什么？

2. Why does the steel ball fall out after the slider operates for a period of time?

铁销从珠沟掉下来导致钢珠损害使用期结束，使钢件表面有疲倦与负荷过重的情况，或许是由于太多负荷、安裝不正确或只要一侧承受力距，这些情况，都有或许导致钢珠脱落。

The iron pin fell from the bead groove, resulting in the end of the service life of the steel ball damage, fatigue and excessive load on the surface of the steel parts, which may be due to too much load, incorrect installation or as long as one side bears the force distance, all of which may cause the steel ball to fall off.

3、在滑块行走一段时间后，发现轴承端盖与端防污有形变或裂开情况？

3. After the sliding block has been running for a period of time, it is found that the bearing end cover and end anti-fouling are deformed or cracked?

安装办法的有误，会让滑块与轨道间仅有一侧承受力，也或许是遭到外力损害而导致轴承端盖与端防污的形变或裂开。滑块内部较差的，能够变化防污体系，更换别的光滑油脂，加上光滑油量，下降润化時间距离。安裝时要注意安裝视角的难点，产品装备的提升，需要由的技能工程师来安裝，防止损害直线导轨滑块。

If the installation method is incorrect, only one side between the slide block and the rail will bear the force, or the bearing end cover and end anti-fouling will be deformed or cracked due to external force damage. If the inside of the slider is poor, it can change the antifouling system, replace other smooth grease, add the amount of smooth oil, and reduce the wetting time distance. During installation, pay attention to the difficulty of installation perspective. The improvement of product equipment needs to be installed by professional skilled engineers to prevent damage to the linear guide slide.

以上关于直线导轨使用常见问题点反馈汇总，仅仅日常工作中遇到的常见的一部分问题，欢迎朋友们补充，也可联系我们http://www.jngongrun.com！

The above feedback summary of common problems in the use of linear guide rail is only a part of common problems encountered in daily work. Friends are welcome to add or contact us http://www.jngongrun.com ！