In most ancient equipment, there are a large number of linear guide sliders, which makes use of the principle that the slider moves back and forth vividly in the linear guide. It is true that the overall moving track is fixed, and there will be lubricating oil, but due to different utilization environments, the slider itself will also have a certain life problem. Therefore, if the linear guide slider is damaged, is it repaired or directly replaced?

1、滑块重要会呈现哪些问题  因为设备、环境等存在着较大的差别性，也不能说滑块在利用进程中一定会呈现雷同或类似的故障，但大体上可能把这些故障或问题进行分成两个局部，一是滑块电机元件局部，二是导轨局部。在滑块电机元件中，存在着马达、弹簧、齿轮等多种小整机，很轻易呈现问题；在导轨局部上比方可能会因为生锈、变形等造成故障。

1. What are the important problems of the slider? Because there are great differences in equipment and environment, it can not be said that the slider will present similar or similar faults in the process of utilization, but generally, these faults or problems may be divided into two parts, one is the slider motor component part, and the other is the guide rail part. In the slider motor components, there are many small machines such as motor, spring and gear, which are easy to present problems; In some parts of the guide rail, for example, it may cause faults due to rust, deformation, etc.

2、是抉择维修还是换新  个别来说，因为大多数滑块体积不大，各种整机都是集成式的装置在里面，所以假如是其中的某一个或多少个整机呈现问题的话，到维修点可能维修，但假如是要害性的整机，可能维修的用度跟换新的差未几了。在大多数情况下，假如导轨不问题，可能直接调换新的滑块，简单便利，用度也不会太高。

2. Whether to repair or replace. Individually, because most sliders are small and all kinds of complete machines are integrated devices, if one or more of them have problems, it may be repaired at the maintenance point, but if it is a critical complete machine, the cost of maintenance may be almost the same as that of replacement. In most cases, if the guide rail is not a problem, it may be directly replaced with a new slider, which is simple and convenient, and the cost will not be too high.

3、假如换新，滑块高吗  用于不同设备的滑块，在上也有着较大的差别，比方用于注塑机上的滑块基本上10－20元就可能搞定，而对雕刻机上的滑块的就十分高了。

3. If the slider is replaced, is the price high? There are great differences in the price of the slider used in different equipment. For example, the slider used in the injection molding machine is basically 10-20 yuan, and the price of the slider on the engraving machine is very high.