欢迎来访济南共润科技有限公司官网!

济南共润科技有限公司

咨询服务热线
0531-88270327 13153168609
当前位置: 首页 - 新闻中心 >
新闻中心

滚动轴承发热的原因及其排除方法

来源:http://www.jngongrun.com/ 日期:2022-07-16 发布人:

(1)原因:轴承精度低方法:选用规定精度等级的轴承。

(1) Reason: low bearing accuracy method: select the bearing with the specified accuracy grade.
(2)原因:主轴弯曲或箱体孔不同心方法:修复主轴或箱体。
(2) Cause: the spindle is bent or the box hole is not concentric method: repair the spindle or box.
(3)原因:皮带过紧方法:调整皮带使松紧适当。
(3) Cause: the belt is too tight method: adjust the belt to make it properly tight.
(4)原因:润滑不良方法:选用规定牌号的润滑材料并适当清洁。
(4) Cause: poor lubrication method: select the specified brand of lubricating materials and clean them properly.
(5)原因:装配质量低方法:提高装配质量。
(5) Cause: low assembly quality method: improve assembly quality.
(6)原因:轴承内外壳跑圈方法:更换轴承及相关磨损部件。
(6) Cause: the inner shell of the bearing runs. Method: replace the bearing and related worn parts.
(7)轴向力太大方法:清洗、调正密封口环间隙要求0.2~0.3mm之间,更正叶轮平衡孔直径及校验静平衡值。
(7) Method of excessive axial force: clean and adjust the clearance of the seal ring between 0.2 ~ 0.3mm, correct the diameter of the impeller balance hole and verify the static balance value.
(8)轴承损坏方法:更换轴承。
(8) Bearing damage method: replace the bearing.
以上就是为大家介绍的有关导轨丝杠的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.jngongrun.com
The above is a detailed introduction about the guide screw for you. I hope it will help you. If you have any questions, please contact us. We will provide services for you with a professional attitude http://www.jngongrun.com

济南共润科技有限责任公司