Linear guide is a fine part, which is used to support and guide moving parts. It can achieve high-precision linear motion under high load, but we should be careful when using it. If it is not used properly, it will not achieve the expected functional effect, and simply damage the linear guide

所以，在运用直线导轨应注意以下事项：

Therefore, the following matters should be paid attention to when using linear guide rail:

1防止锈蚀：直接用手拿取直线导轨时，要充分洗去手上的汗液，并涂以矿物油后再进行操作，在旱季和夏日特别要注意防锈。

1. Prevent corrosion: when directly taking the linear guide rail by hand, it is necessary to fully wash the sweat from your hands and apply high-quality mineral oil before operation. Pay special attention to rust prevention in dry seasons and summer.

2装置东西要适宜：直线导轨运用适宜、精确的装置东西尽量运用专用东西，竭力防止运用布类和短纤维之类的东西。

2. The devices should be suitable: the linear guide rail should use appropriate and accurate devices, try to use special things, and try to prevent the use of things such as cloth and short fibers.

3坚持环境清洗：坚持直线导轨及其周围环境的清洗即使是肉眼看不见的细小尘埃进入导轨，也会添加导轨的磨损，振荡和噪声。

3 adhere to environmental cleaning: adhere to the cleaning of the linear guide rail and its surrounding environment. Even if the invisible fine dust enters the guide rail, it will add wear, vibration and noise to the guide rail.

4装置要认真仔细：直线导轨在运用装置时要认真仔细，不允许强力冲压，不允许用锤直接敲击导轨，不允许经过翻滚体传递压力。

4. The device should be careful: the linear guide rail should be careful when using the device, and it is not allowed to punch strongly, directly hit the guide rail with a hammer, or transmit pressure through the tumbling body.

以上就是为大家介绍的有关导轨丝杠的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.jngongrun.com

The above is a detailed introduction about the guide screw for you. I hope it will help you. If you have any questions, please contact us. We will provide services for you with a professional attitude http://www.jngongrun.com

上一篇：滚动轴承发热的原因及其排除方法
下一篇：直线导轨在机床上的工作模式