一般情况下，直线导轨压入导轨腔后是不会出现堵塞情况的。但是在现实生活中又不少操作者在使用直线导轨时会经常出现导轨上轴承滚动不灵活的情况，这样就会影响导轨的工作性能。那么在运用直线导轨时应该注意哪些问题呢？导轨丝杠厂家为您讲解。

Generally, the linear guide rail will not be blocked after it is pressed into the guide rail cavity. However, in real life, many operators often have inflexible rolling of the bearing on the guide rail when using the linear guide rail, which will affect the working performance of the guide rail. So what should we pay attention to when using linear guide rail? The guide screw manufacturer will explain to you.

一、直线导轨装置方法

1、 Linear guide device method

由于直线导轨是高精度产品，如果装置不正确，很容易造成导轨通道损坏，造成导轨损坏。在装置直线导轨时应配备专用模具，不能随意敲击。当导轨压入轴内时，一定要根据轴的承受力大小去进行装置。进行设备安装时要尽量使用气压或液压，如果在装置过程中有异常声响时须立即停止安装。以免轴承通道损坏。

Because the linear guide rail is a high-precision product, if the device is not correct, it is easy to cause damage to the guide rail channel, causing damage to the guide rail. When installing the linear guide rail, it should be equipped with a special mold, which can not be knocked at will. When the guide rail is pressed into the shaft, it must be installed according to the bearing capacity of the shaft. When installing the equipment, try to use air pressure or hydraulic pressure. If there is abnormal noise in the process of installation, stop the installation immediately. To avoid damage to the bearing channel.

二、避免导轨存留异物

2、 Avoid foreign matters in the guide rail

直线导轨在安装或者工作时，会很容易掉入铁屑，这样会对轨道的运行产生影响。为了避免直线导轨因为铁屑而产生磨损，有的厂家会在导轨腔内涂上一定量的润滑油或润滑脂，以达到润滑效果。然而，在实际生产当中不少操作人员很难控制润滑液的使用量，这样会很容易导致导轨腔中积聚大量润滑液，当导轨工作时，润滑液就会沿着轨道进入轴承。

When the linear guide rail is installed or working, it is easy to fall into scrap iron, which will affect the operation of the rail. In order to avoid wear of linear guide rail due to iron filings, some manufacturers will apply a certain amount of lubricating oil or grease in the guide rail cavity to achieve lubrication effect. However, in actual production, it is difficult for many operators to control the amount of lubricant used, which will easily lead to a large amount of lubricant accumulated in the guide rail cavity. When the guide rail works, the lubricant will enter the bearing along the rail.

三、防止油漆生锈

3、 Prevent paint from rusting

油漆生锈是直线导轨常遇到的情况。为了防止直线导轨发生油漆生锈的情况，在日常使用时应当经常对导轨表面进行护理，尤其是对于已经在仓库放置一段时间的直线导轨来讲，在长期放置过程中难免会出现导轨油漆生锈的情况，这主要是因为仓库中环境比较复杂，在一定的温度和湿度下不少物质混合会构成腐蚀性物质，并对导轨表面造成腐蚀影响，使导轨产生磨损。

Rust on the paint is a common condition of linear guide rail. In order to prevent the paint rust of the linear guide rail, the surface of the guide rail should be regularly treated during daily use. Especially for the linear guide rail that has been placed in the warehouse for a period of time, it is inevitable that the paint rust of the guide rail will occur during long-term storage. This is mainly because the environment in the warehouse is relatively complex, and many substances will form corrosive substances when mixed under a certain temperature and humidity, It will also cause corrosion on the surface of the guide rail and make the guide rail wear.

直线导轨虽然在实际工业生产当中使用频率比较高，但是不少工厂因为不懂得科学维护，以于导轨表面常常会出现磨损的情况。为了避免影响生产工作，建议厂家要经常性的对导轨表面进行维护和保养，同时还要做好维修记录。更多相关内容就来咨询我们http://www.jngongrun.com吧！

Although the linear guide rail is used frequently in actual industrial production, many factories often wear the guide rail surface because they do not understand scientific maintenance. In order to avoid affecting the production work, it is recommended that the manufacturer should regularly maintain the surface of the guide rail, and make maintenance records at the same time. Consult us for more information http://www.jngongrun.com Come on!