雕刻机是一种数控机床，可应用于各种超薄玻璃的异形切割，精细加工，在玻璃智能化生产中发挥了巨大作用。而雕刻机工作过程中，因为主轴运动会产生大量热量，如果不及时散热，会给玻璃精雕机造成严重影响，造成工作性能下降，生产精度降低。下面导轨丝杠厂家给行业朋友介绍下雕刻机主轴的降温方式。

Engraving machine is a CNC machine tool that can be applied to the irregular cutting and fine processing of various ultra-thin glass, playing a huge role in the intelligent production of glass. During the working process of the engraving machine, due to the movement of the main shaft, a large amount of heat is generated. If not dissipated in a timely manner, it will have a serious impact on the glass engraving machine, resulting in a decrease in working performance and production accuracy. Below, the guide rail screw manufacturer will introduce the cooling method for the carving machine spindle to industry friends.

尤其在高速铣削、钻孔、雕刻中，雕刻机主轴降温通常有三种方式，水冷、风冷和油冷。

Especially in high-speed milling, drilling, and engraving, there are usually three ways to cool the spindle of the engraving machine: water cooling, air cooling, and oil cooling.

一是通过循环水冷却主轴

One is to cool the spindle through circulating water

这种方式，通常要设备预留散热水管道，采用外置冷水机或水塔对主轴进行降温，它更为，噪音低，而操作温度也方便，设定好温度就可以自动降温了。一段时间后，雕刻机主轴就能降低到可以工作的温度区间。

This method usually requires the equipment to reserve a hot water pipeline and use an external chiller or water tower to cool the spindle. It is more environmentally friendly, has low noise, and is convenient to operate at a temperature. Once the temperature is set, it can automatically cool down. After a period of time, the main spindle of the engraving machine can be lowered to a temperature range that can work.

二是通过风扇给主轴散热

The second is to dissipate heat from the main shaft through a fan

风扇散热，有一定的弊端，就是噪音较高，自身温度无法降低到佳的状态，而且会受到车间灰尘环境的影响，造成风扇散热不良等故障，需定期清理。不过主轴降温效果还行，设备整体布置会较少。

Fan cooling has certain drawbacks, such as high noise, inability to reduce its own temperature to a optimal state, and being affected by the dust environment in the workshop, resulting in poor fan cooling and other faults. Regular cleaning is necessary. However, the cooling effect of the spindle is still good, and the overall layout of the equipment will be less.

三是通过油冷却方式给主轴降温

The third method is to cool the spindle through oil cooling

雕刻机，采用油冷却降温方式不太多，因为油脂较容易产生脏污，在极端低温的情况下，流动性降低，影响制冷效率和降温效果。而通过加热润滑油，会得到较好的散热效果。

Engraving machines do not use many methods of oil cooling for cooling, as grease is prone to dirt. In extreme low temperatures, the fluidity decreases, affecting the cooling efficiency and cooling effect. By heating the lubricating oil, a better heat dissipation effect can be achieved.

以上就是给雕刻行业朋友介绍的，三种冷却降温方式，通常雕刻机多采用导轨丝杠厂家小型冷水机，小功率，不仅方便使用，而且散热效果较佳，而大功率的可采用水冷冷水机降温，方便可调主轴降低温度。更多相关内容就来我们网站http://www.jngongrun.com进行咨询了解！

The above is an introduction to friends in the carving industry. There are three cooling methods. Generally, carving machines use small chillers from guide rail screw manufacturers, which are low-power and not only convenient to use, but also have better heat dissipation effects. For high-power machines, water-cooled chillers can be used to cool down, making it convenient to adjust the main shaft to reduce temperature. For more related content, come to our website http://www.jngongrun.com Conduct consultation to understand!