Please handle with care to avoid bumping to affect the linear accuracy of the guide pair. It is not allowed to remove the slide from the guide rail or push it back beyond the stroke. If the installation is difficult and the slide needs to be removed, you can order the guide rail from our company.

（引导轨是一种装配辅助工具，其实际尺寸比导轨小一号。需要时，可将导轨与引导轨的端头对接，把滑块从导轨推到引导轨上，当导轨安装好后，再将滑块从引导轨上推到导轨上，注意基准方向）。

(the guide rail is an assembly aid whose actual size is one size smaller than the guide rail. If necessary, butt the end of the guide rail with the guide rail, and push the slider from the guide rail to the guide rail. When the guide rail is installed, push the slider from the guide rail to the guide rail, and pay attention to the reference direction).

线性导轨润滑

Linear guide lubrication

线性导轨副的的润滑的主要目的是减少摩擦和磨损以防止过热，破坏其内部结构，影响导轨副的运动功能。线性导轨副在出厂之前均已经填注了低噪音润滑脂，以保证滚珠在运行过程的良好润滑。

The main purpose of lubrication of linear guide pair is to reduce friction and wear to prevent overheating, damage its internal structure and affect the motion function of guide pair. The linear guide pair has been filled with low-noise high-grade grease before leaving the factory to ensure the good lubrication of the ball during operation.

但为了避免因润滑损耗造成的润滑损耗造成的润滑不足，建议在滑块实际总运动行行程50km时候定期补充。当线性滑轨副的运动速度为高速时（V≥35m/min），使用N32润滑或接油管强制润滑。低速时（V≤35m/min）使用锂基润滑脂润滑。

However, in order to avoid insufficient lubrication caused by lubrication loss, it is recommended to supplement the slider regularly when the actual total travel distance is 50km. When the velocity of linear slide pair is high speed (V ≥ 35m / min), N32 lubrication or tubing forced lubrication is recommended. Lithium grease is recommended for low speed (V ≤ 35m / min).