来源：https://www.jngongrun.com/ 日期：2021-07-06 发布人：

1、滚珠丝杆必须保持干净，擦拭清洁，不使异物进入螺母内。

1. The ball screw must be kept clean and wiped to prevent foreign matters from entering the nut.

2、不可任意敲打，并保持外观不碰伤。

2. Don't knock at will, and keep the appearance from bumping.

3、安装面的表面修整及清洁要彻底。

3. Finish and clean the surface of the mounting surface thoroughly.

4、合宜的公差及精确的校正，保证丝杆运行无阻力。

4. Proper tolerance and accurate correction ensure that the screw rod runs without resistance.

5、适宜的润滑，加合适的润滑脂。

5. Proper lubrication, add proper grease.

6、不可将丝杆与螺母分离。

6. Do not separate the screw rod from the nut.

7、更好在丝杆两端加装防撞器，以免运转超过行程极限而损伤滚珠丝杆。

7. It is better to install anti-collision devices at both ends of the screw to avoid damage to the ball screw due to exceeding the travel limit.

8、使用保护套来保护滚珠丝杆，以免异物运行进入损坏丝杆。

8. Use a protective sleeve to protect the ball screw to prevent foreign matters from entering and damaging the screw.

9、滚珠丝杆涂以锂基润滑脂润滑。

9. The ball screw is lubricated with lithium grease.

• 上一篇：直线导轨如何清楚渣滓粉尘
• 下一篇：滚珠丝杠反相器的作用是什么？

相关：
• 
  导轨丝杠选型必看！滚...
  <>
• 
  导轨丝杠选型避坑！滚...
  <>
• 
  滚珠丝杆装配错1步=...
  <>
• 
  导轨丝杠：精密传动界...
  <>
• 
  导轨丝杠：滚珠丝杠副...
  <>