欢迎来访济南共润科技有限公司官网!

济南共润科技有限公司

咨询服务热线
0531-88270327 13153168609
当前位置: 首页 - 新闻中心 >
新闻中心

直线导轨的清洁方式

来源:http://www.jngongrun.com/ 日期:2022-08-18 发布人:admin

导轨、直线轴作为设备的核心部件之一,它的功用是起导向和支承作用。为了保证机器有较高的加工精度,要求其导轨、直线具有较高的导向精度和良好的运动平稳性。设备在运行过程中,由于被加工件在加工中会产生大量的腐蚀性粉尘和烟雾,基这些烟雾和粉尘长期大量沉积于导轨、直线轴表面,对设备的加工精度有很大影响,并且会在导轨直线轴表面形成蚀点,缩短设备使用寿命。为了让机器正常稳定工作,确保产品的加工质量,要认真做好导轨、直线轴的日常维护。

As one of the core components of the equipment, the guide rail and linear shaft are used to guide and support. In order to ensure high machining accuracy of the machine, its guide rail and straight line are required to have high guiding accuracy and good motion stability. During the operation of the equipment, a large amount of corrosive dust and smoke will be produced during the processing of the processed parts. These smoke and dust will be deposited on the surface of the guide rail and the linear shaft for a long time, which will have a great impact on the processing accuracy of the equipment, and will form corrosion spots on the surface of the guide rail and the linear shaft, thus shortening the service life of the equipment. In order to ensure the normal and stable operation of the machine and the processing quality of the products, the daily maintenance of the guide rail and the linear shaft should be carefully done.
注意:清洁导轨请准备——干棉布、润滑油。雕刻机的导轨分为直线导轨、滚轮导轨。直线导轨的清洁:首先把激光头移动到右侧(或左侧),找到直线导轨,用干棉布擦拭直到光亮无尘,再加上少许润滑油(可采用缝纫机油,切勿使用机油),将激光头左右慢慢推动几次,让润滑油均匀分布即可。
Note: please prepare dry cotton cloth and lubricating oil for cleaning the guide rail. The guide rail of the engraving machine is divided into linear guide rail and roller guide rail. Cleaning of linear guide: first move the laser head to the right (or left), find the linear guide, wipe it with dry cotton cloth until it is bright and dust-free, add a little lubricating oil (sewing machine oil can be used, do not use engine oil), and slowly push the laser head to the left and right for several times, so that the lubricating oil can be evenly distributed.
滚轮导轨的清洁:把横梁移动到内侧,打开机器两侧端盖,找到导轨,用干棉布把两侧导轨与滚轮接触的地方擦拭干净,再移动横梁,把剩余地方清洁干净。
Cleaning of roller guide rail: move the beam to the inside, open the end covers on both sides of the machine, find the guide rail, wipe the place where the guide rail on both sides contacts the roller with dry cotton cloth, and then move the beam to clean the rest.
以上就是为大家介绍的有关导轨丝杠的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.jngongrun.com
The above is the detailed introduction of the guide rail lead screw. I hope it will help you. If you have any questions, please contact us. We will provide you with services in a professional manner http://www.jngongrun.com

济南共润科技有限责任公司