新闻中心
导轨容易生锈,该如何预防?
来源:http://www.jngongrun.com/ 日期:2022-12-07 发布人:
金属容易生锈,这是行业常识,但是保护的好,可以防止生锈,大大延长寿命。所以,ABBA导轨生锈的主要原因就是我们对于ABBA导轨的养护做得不到位。
Metals are easy to rust, which is the common sense of the industry. However, good protection can prevent rust and greatly extend the service life. Therefore, the main reason for ABBA guide rail rusting is that our maintenance of ABBA guide rail is not in place.
其实,ABBA导轨在出厂的时分,或许在加工商加工出来的时分,他都会在上面擦洗一层防锈油,那么为什么还会生锈。
In fact, when ABBA guide rails leave the factory, or when they are processed by the processor, they will scrub a layer of antirust oil on them, so why do they rust.


对于这个问题,咱们询问了许多客户的运用情况,得出的定论一致是:他们运用结束后,就放在了库房里,也没有在运用结束后做一些防护办法,下面,小编为咱们介绍几种防护办法:
For this question, we asked many customers about their use, and the conclusion is that they put it in the warehouse after the use, and did not do some protective measures after the use. Here are some protective measures:
一、在运用结束后,在ABBA导轨上面擦洗一层防锈油;
1、 After the use, wipe a layer of antirust oil on the ABBA guide rail;
二、放在常温库房里,不要有腐蚀性的东西混在一同;
2、 Put it in the normal temperature warehouse, and do not mix corrosive things together;
三、要一致库房支架,不要把不用的ABBA导轨放在地下,由于地下防锈油蒸发的快,所以这一点必定要注意;
3、 The warehouse support shall be consistent, and the unused ABBA guide rail shall not be placed underground. Due to the rapid evaporation of underground antirust oil, this must be noted;
以上就是为大家介绍的有关导轨丝杠的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.jngongrun.com
The above is a detailed introduction to the guide screw, and we hope it will be helpful to you. If you have any questions, please contact us. We will provide you with professional services http://www.jngongrun.com
- 上一篇:直线导轨安装的一些疑难问题
- 下一篇:空间小导轨压力的方法
- 丝杠动态扭矩的测量方...<>
- 导轨承载方向的确定方...<>
- 导轨常用的抗腐蚀材料...<>
- 导轨滑块游隙怎么调?<>
- 导轨滑块润滑脂的正确...<>
相关: