丝杆支撑座具有结构简单，拆装方便，安装允许偏差大，在使用过程中既要注意丝杆，也要需要注意支撑座，下面导轨丝杠厂家跟大家分享下滚珠丝杠支撑座在使用中注意事项：

The screw rod support seat has simple structure, convenient disassembly and assembly, and large allowable installation deviation. Pay attention to both the screw rod and the support seat in the process of use. The guide screw manufacturer will share with you the precautions for the use of the lower ball screw support seat:

1、安装和使用中保持支撑座的清洁是为了防止粉尘和杂物的进入，必要时，还也好采取一定的防护措施。

1. The purpose of keeping the support seat clean during installation and use is to prevent dust and sundries from entering. If necessary, certain protective measures can also be taken.

2、安装到丝杆时务必要小心保护密封圈唇部，密封圈唇部很容易受到破损和变形。

2. When installing the screw rod, it is necessary to carefully protect the sealing ring lip, which is easily damaged and deformed.

3、TBI滚珠丝杠支撑座已注入了适量的润滑脂，在没有使用之前不需要另加润滑脂，也为了避免浪费。

3. The TBI ball screw support seat has been injected with proper amount of grease. It is not necessary to add additional grease before use, and it is also to avoid waste.

4、轴向锁紧螺母的径向锁紧螺钉要在安装确认完毕后给以锁紧，必要时，加注螺丝以防松胶固定。

4. The radial locking screw of the axial locking nut shall be locked after the installation is confirmed. If necessary, the screw shall be filled to prevent loosening.

丝杆支撑座是考虑了安装周围空间的、小体积的设计。同时，装入了经过调整预压的轴承，交货后就可直接进行装配，既降低了装配工时，又可提高装配精度。关注我们http://www.jngongrun.com，了解更多事项！

The screw rod support seat is a small volume design considering the space around the installation. At the same time, the adjusted preloaded bearing is installed, and can be directly assembled after delivery, which not only reduces the assembly time, but also improves the assembly accuracy. Follow us http://www.jngongrun.com , learn more!