新闻中心

联轴器的检查与保养维护相关事项

来源：http://www.jngongrun.com/ 日期：2023-02-07 发布人：

很多人都知道联轴器是各运动机构的中间连接部件，它对各运动机构的正常运转有直接影响，下面导轨丝杠厂家来说一下联轴器的检查与保养维护相关事项：

Many people know that the coupling is the intermediate connecting part of each motion mechanism, which has a direct impact on the normal operation of each motion mechanism. The following guide rail lead screw manufacturer will talk about the inspection and maintenance of the coupling:

一、联轴器的检查

1、 Inspection of coupling

1.检查联轴器本体上有没有裂痕。

1. Check the coupling body for cracks.

2.检查联轴器的联接是否坚固牢靠。

2. Check whether the coupling is firm and firm.

3.检查联轴器的键槽是否松动、滚键。

3. Check whether the keyway of the coupling is loose and rolled.

4.检查联轴器转动时是否有径向圆跳动和端面跳动。

4. Check whether there is radial circular runout and end face runout when the coupling rotates.

5.时常检查联轴器的润滑状态是否良好。

5. Always check whether the coupling is in good lubrication condition.
导轨丝杠

6.齿式联轴器时常检查齿轮完整状态，磨损状况及内外齿轮啮合情况。

6. Always check the gear integrity, wear and engagement of internal and external gears for gear coupling.

二、联轴器的保养与维护

2、 Maintenance of coupling

1.定期为设备局部拆卸和检查，对规定部分进行清理清洗。

1. Periodically disassemble and inspect the parts of the equipment, and clean the specified parts.

2.观察密封状态，调整设备各部位的间隙，定期检查紧固各设备的各个部位。

2. Observe the sealing status, adjust the clearance of all parts of the equipment, and regularly check and fasten all parts of the equipment.

3.定期加油，做防锈处理。

3. Add oil regularly and conduct anti-rust treatment.

在工作运转中，应经常观察联轴器是否发生异常的径向摆动和轴承发热等现象，发现这些现象必须及时维修。更多相关事项就来我们网站http://www.jngongrun.com咨询了解吧！

During the operation, it is necessary to frequently observe whether the coupling has abnormal radial oscillation and bearing heating, and if these phenomena are found, they must be repaired in time. Come to our website for more relevant matters http://www.jngongrun.com Ask about it!

上一篇：直线导轨和直线滑轨是一样的吗？
下一篇：关于导轨的设计要求与设计内容