随着数控机床及其他自动控制设备的广泛应用，具有摩擦系数小，刚度大、导向精度高等有点的直线导轨正在被越来越多的领域应用，人们也开始重视它的使用与保养。下面导轨丝杠厂家来讲讲直线导轨的安装使用与保养注意事项！

With the wide application of numerical control machine tools and other automatic control equipment, linear guideways with small friction coefficient, high stiffness and high guiding accuracy are being used in more and more fields, and people are beginning to pay attention to its use and maintenance. The guide rail lead screw manufacturer will talk about the installation, use and maintenance precautions of the linear guide rail!

直线导轨的安装使用

Installation and use of linear guide rail

1、请勿自行拆卸，直线导轨的滑块，以免异物进入影响精度和使用寿命，导轨应该放置在平面上，否则导轨可能会变形。

1. Do not disassemble the slide of the linear guide rail by yourself, so as not to affect the accuracy and service life due to the entry of foreign matters. The guide rail should be placed on a flat surface, otherwise the guide rail may be deformed.

2、如果需要垂直安装导轨时要留意滑块是否会掉落，如果滑块不慎滑落，可联系厂家。

2. If it is necessary to install the guide rail vertically, pay attention to whether the slide will fall. If the slide falls accidentally, contact the manufacturer.

3、直线导轨产品建议在干净的环境中使用，在产品外面额外装置保护罩，以防止灰尘和粉末的进入，从而影响产品精度与使用寿命。

3. Linear guide rail products are recommended to be used in a clean environment. An additional protective cover is installed outside the product to prevent dust and powder from entering, thus affecting the accuracy and service life of the product.

4、如果需要再恶劣的环境中使用直线导轨，比如说腐蚀的环境，需要和厂家沟通对直线导轨进行磷酸皮膜或镀硬铬处理。

4. If it is necessary to use the linear guide rail in a harsh environment, such as a corrosive environment, it is necessary to communicate with the manufacturer to carry out phosphate coating or hard chrome plating on the linear guide rail.

5、通常直线导轨的使用温度上限在80摄氏度，如果超过这个温度，请和厂家沟通好，为您选择特殊的直线导轨产品。

5. Generally, the upper limit of the use temperature of the linear guide rail is80 ℃. If it exceeds this temperature, please communicate with the manufacturer to select a special linear guide rail product for you.

直线导轨的保养

Maintenance of linear guide rail

1、直线导轨是精密的机械零部件，所以厂家在出厂前会做防锈处理，买家在使用时请先把防锈油清洗干净，之后加注润滑油，润滑油是不可或缺的。

1. The linear guide rail is a precise mechanical component, so the manufacturer will do anti-rust treatment before leaving the factory. The buyer should clean the anti-rust oil before using it, and then fill in the lubricating oil. The lubricating oil is indispensable.

2、直线导轨产品需要定期的保养，定期做防锈。

2. Linear guide rail products need regular maintenance and regular rust prevention.

3、润滑油该加就要加，定期检查一下直线导轨的运行状况，如果导轨表面没有油膜覆盖了就要加润滑油，如果导轨表面被灰尘和金属粉尘污染了，可以先用没有清洗一下再加润滑油。

3. The lubricating oil should be added as soon as it is needed. Check the running condition of the linear guide rail regularly. If the guide rail surface is not covered by oil film, add lubricating oil. If the guide rail surface is polluted by dust and metal dust, add lubricating oil without cleaning.

此外要预防直线导轨出现锈蚀，如果操作人员需要直接用手去拿取直线导轨的话，那么应该将手中的汗液彻底清洗干净，涂抹上优良的矿油，然后再去拿取直线导轨。更多相关内容就来我们网站http://www.jngongrun.com咨询了解！

In addition, it is necessary to prevent the corrosion of the linear guide rail. If the operator needs to take the linear guide rail directly with his hands, he should thoroughly clean the sweat in his hands, apply fine mineral oil, and then take the linear guide rail. Come to our website for more relevant content http://www.jngongrun.com Consult and understand!