导轨丝杠在CNC工具机械中，主要功用在于增加定位精度及延长使用寿命。机械运转时的背隙，通常会搭配有预压力的导轨丝杠，但若导轨丝杠安装不当时，就无法展现其高精度与较长的寿命。以下是避免导轨丝杠使用错误的建议：

The main function of guide screw in CNC tool machinery is to increase positioning accuracy and extend service life. To eliminate the back clearance during mechanical operation, it is usually paired with a pre pressed guide screw. However, if the guide screw is not installed properly, it cannot demonstrate its high accuracy and long service life. The following are suggestions to avoid incorrect use of guide screw:

1.不允许超载使用：导轨丝杠在使用过程中应该避免超载，因为超载容易导致导轨丝杠的负荷能力下降，影响使用寿命。

1. Overloading is not allowed: The guide screw should avoid overloading during use, as overloading can easily reduce the load capacity of the guide screw and affect its service life.

2.避免使用环境过于恶劣：如果导轨丝杠处于过于恶劣的环境中，如高温、潮湿、腐蚀等，会影响导轨丝杠的使用效果，降低使用寿命。

2. Avoid using in harsh environments: If the guide screw is exposed to harsh environments such as high temperature, humidity, corrosion, etc., it can affect the effectiveness of the guide screw and reduce its service life.

3.不要在超出规定速度范围的情况下使用：在选用导轨丝杠时，应根据规定的速度范围来选择适当的型号，不可在超出规定速度范围的情况下使用。

3. Do not use it beyond the specified speed range: When selecting guide screw, the appropriate model should be selected based on the specified speed range, and cannot be used beyond the specified speed range.

4.避免使用过度：在使用导轨丝杠时应避免过度，导轨丝杠易产生磨损和疲劳，影响使用寿命。

4. Avoid excessive use: When using guide screw, excessive use should be avoided, as the guide screw is prone to wear and fatigue, which affects its service life.

5.定期润滑：导轨丝杠需要定期润滑，但是使用的润滑油应符合产品规格，过量或不足都会导致故障的发生。

5. Regular lubrication: The guide screw needs regular lubrication, but the lubricating oil used should meet the product specifications. Excessive or insufficient lubrication can lead to faults.

6.注意清理：导轨丝杠在使用的过程中应定期清理，特别是清理导轨，防止灰尘等杂物进入导轨，影响导轨丝杠的使用寿命。

6. Attention to cleaning: The guide screw should be cleaned regularly during use, especially to prevent dust and other debris from entering the guide rail and affecting its service life.

7.严格控制安装误差：在安装导轨丝杠时，应注意控制安装误差，特别是安装定位部件时，一定要保证定位精度，避免因安装失误导致故障的发生。

7. Strictly control installation errors: When installing guide rail screws, attention should be paid to controlling installation errors, especially when installing positioning components, ensuring positioning accuracy to avoid faults caused by installation errors.

在安装的过程中，导轨丝杠的摩擦系数很小，在搬运及安装过程中，注意垂直放置时，避免螺帽或丝杠本身的自重而产生脱落造成损伤。如有上述情况，此时必须经制造商的重新检修，以防止进一步损坏。您还有什么需求可以随时来我们网站http://www.jngongrun.com咨询。

During the installation process, the friction coefficient of the guide rail lead screw is very small. During transportation and installation, pay attention to placing it vertically to avoid the nut or lead screw from falling off and causing damage due to its own weight. If the above situation occurs, it must be re inspected by the manufacturer to prevent further damage. If you have any further needs, please feel free to come to our website at any time http://www.jngongrun.com consulting service