Why should we talk about price from the beginning? Because standard rolling linear guides are already designed linear guides that can be mass-produced directly in the rolling linear guide production workshop, the production cost has reached a lower level, while non-standard rolling linear guides require redesign, testing, and mass production, which is usually a long process and the cost is high before mass production, The factory prices of non-standard rolling linear guides are relatively high.

标准滚动直线导轨和非标滚动直线导轨的区别

The difference between standard rolling linear guide and non-standard rolling linear guide

直线导轨规格型号尺寸表,直线导轨规格型号选型

Linear guide rail specifications, models, and dimensions table, selection of linear guide rail specifications and models

标准直线导轨尺寸参数固定，非标直线导轨尺寸参数是不确定的

Standard linear guide rail size parameters are fixed, while non-standard linear guide rail size parameters are uncertain

标准滚动直线导轨尺寸参数已经是固定，根据不同的需求，还可以跟零部件进行组合。而非标滚动直线导轨尺寸参数是不确定的，用户可能会给出比较奇怪的尺寸参数，这些尺寸参数是标准滚动直线导轨里面尚未存在的。

The size parameters of the standard rolling linear guide rail are already fixed, and can be combined with components according to different needs. The size parameters of non-standard rolling linear guides are uncertain, and users may provide strange size parameters that do not yet exist in standard rolling linear guides.

标准直线导轨不需要重新设计，而非标直线导轨需要设计

Standard linear guides do not require redesign, while non-standard linear guides require design

因为标准滚动直线导轨的设计工作已经完成，所以不需要再单独设计，如果有新的型号出现，才会需要在原有的设计基础上再做改动。而非标滚动直线导轨在完成钱，则是需要重新做设计的。

Because the design work of the standard rolling linear guide rail has been completed, there is no need to design it separately. If a new model appears, it will need to be modified based on the original design. The non-standard rolling linear guide rail needs to be redesigned after completion.

非标滚动直线导轨不能只按照用户规定的来设计

Non standard rolling linear guide rails cannot be designed solely according to user specifications

可能用户给的非标直线导轨一些参数看起来是没什么问题的，但不经过设计、反复测算和试验是不能轻易下定论的，而经过一系列计算和试验后，可能得出来的结论是这样的参数尺寸搭配是较难完成或者在当前的条件下是根本不可能做到的，所以这就需要在技术和需求上做权衡了，可能不按照用户规定的来设计，当然这是需要跟用户沟通说明情况的

Some parameters of non-standard linear guides provided by users may seem to be fine, but it cannot be easily determined without design, repeated calculation, and testing. After a series of calculations and experiments, it may be concluded that such parameter size matching is difficult to achieve or impossible to achieve under current conditions, so it is necessary to balance technology and requirements, It may not be designed according to user regulations, but of course, this requires communication and explanation with the user