欢迎来访济南共润科技有限公司网站!

济南共润科技有限公司

咨询服务热线
0531-88270327 13153168609
当前位置: 首页 - 新闻中心
新闻中心

直线导轨也是大家常说的线性导轨,那样的机械设备应用构

来源:http://www.jngongrun.com/ 日期:2020-12-09 发布人:

直线导轨也是大家常说的线性导轨,那样的机械设备应用构件归属于精细的零件,因而,在应用的情况下,稍不留神,会导致零件的毁坏,在生产制造实际操作的情况下,一定要采用较为慎重的生产制造心态,避免出现由于应用有误而导致线性导轨的毁坏的状况。

Linear guide rail is also commonly referred to as linear guide rail. Such mechanical equipment application components belong to fine parts. Therefore, in the case of application, a little carelessness will lead to the destruction of parts. In the actual operation of production and manufacturing, we must adopt a more cautious production and manufacturing mentality to avoid the damage of linear guide rail due to application errors.
1、应用规定
1. Application regulations
针对应用的自然环境直线导轨也拥有较为高的应用规定,在大家生产制造的自然环境中,不但有看得清的尘土,还存有一些看不到的尘土,这种尘土一旦掉入到线性导轨中,会出現一些欠佳的应用反映,例如提升滑轨的磨坏度,使机械设备的震动能量增加,还有便是噪声声提升等,进而会引发出别的的应用的难题。
For the application of natural environment, linear guide rail also has higher application requirements. In the natural environment of production and manufacturing, there are not only visible dust, but also some invisible dust. Once this dust falls into the linear guide rail, there will be some poor application reflection, such as improving the wear degree of slide rail, increasing the vibration energy of mechanical equipment, and convenient It will lead to other application problems.
直线导轨
2、安裝事宜
2. Installation matters
针对线性导轨的安裝,也必须仔细认真,在安裝的情况下,不能出現力开展冲压模具的状况,也不能应用吊物对滑轨开展安裝和敲打,一旦出現安裝不善的状况,要采用技术性上的个人行为开展安裝。
For the installation of linear guide rail, it is also necessary to be careful. In the case of installation, it is not allowed to carry out the stamping die with super strength, nor can the hanging object be used to install and knock the slide rail. In case of improper installation, technical personal behavior shall be adopted for installation.
3、要避免出现生锈的状况
3. Rust should be avoided
要避免出现那样的应用状况,防止立即的应用两手取拿那样的零配件,而恰当的作法便是应用前把自己的两手清理整洁,除去污垢和汗水,还有便是能够再直线导轨上擦抹好一些矿物质植物油脂,随后在开展别的层面的实际操作。尤其是来到湿冷的夏天,一定要搞好防水解决。
To avoid such application situation, first of all, prevent the immediate application of two hands to take such parts, and the proper way is to clean up your hands before application, remove dirt and sweat, and then wipe some mineral vegetable grease on the linear guide rail, and then carry out other practical operation. Especially come to the wet and cold summer, we must do a good job in waterproof solution.

济南共润科技有限责任公司