1. Use requirements

对于使用的环境直线导轨也有着比较高的使用要求，在我们生产的环境中，不仅有看得见的灰尘，还存在一些看不见的灰尘，这些灰尘一旦落入到线性导轨中，会出现一些不良的使用反应，比如说提高导轨的磨损度，使机械的振动力量加大，再有是噪音声提高等，继而会引发出其他的使用的问题。

The linear guide rail also has high requirements for the use environment. In our production environment, there are not only visible dust, but also some invisible dust. Once the dust falls into the linear guide rail, there will be some adverse use reactions, such as improving the wear of the guide rail, increasing the mechanical vibration force, and increasing the noise, which will lead to other use problems.

2、安装事项

2. Installation matters

对于线性导轨的安装，也需要认真仔细，在安装的时候，不可以出现进行冲压的状况，也不可以使用重物对导轨进行安装和敲击，一旦出现安装不当的状况，要采取技术上的行为进行安装。

The installation of linear guide rail also needs to be careful. When installing, it is not allowed to punch, or use heavy objects to install and knock the guide rail. In case of improper installation, it is necessary to take technical actions to install.

3、要避免出现锈蚀的状况

3. Rust shall be avoided

要避免出现这样的使用状况，避免直接的使用双手取拿这样的配件，而正确的做法是使用前把自己的双手清洗干净，去除污渍和汗液，再有是可以再直线导轨上涂抹好一些矿物油脂，然后在进行其他方面的操作。尤其是到了潮湿的夏季，一定要做好防潮处理。

To avoid such use, first of all, avoid using your hands to take such accessories directly. The correct way is to clean your hands before use to remove stains and sweat. In addition, you can apply some mineral grease on the linear guide rail, and then perform other operations. Especially in the humid summer, we must do a good job of moisture-proof treatment.

以上就是为大家介绍的有关导轨丝杠的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.jngongrun.com

The above is a detailed introduction to the guide screw, and we hope it will be helpful to you. If you have any questions, please contact us. We will provide you with our attitude http://www.jngongrun.com