1、 The upper end and side of the linear guide rail are made of plastic parts. During loading and unloading, we should pay attention not to hammer with hard objects. After loading and unloading, during the test run, no other hardware objects can hit it violently. If the plastic objects of the guide rail are cracked, the ball in the guide rail will roll out, and of course, the slider will fall off. 2、 The cleaning of the guide rail is also very important. Generally, the guide rail has been injected with lubricant before leaving the factory. If you want to clean the guide rail again, let the guide rail dry before adding lubricant. The guide rail cannot work without lubricant.

三、对于不熟悉直线导轨的工作人员来说，一定要注意不可以随便装卸导轨的的任何零件，一方面是怕造成导轨的度和灵活度，也不能对导轨肆意安装滚珠。

3、 For the staff who are not familiar with the linear guide rail, they must pay attention not to load and unload any parts of the guide rail at will. On the one hand, they are afraid of causing the flexibility and flexibility of the guide rail, and they should not arbitrarily install balls on the guide rail.

四、一点对于导轨上的滑块也不可以随意装卸，若有需要要装卸的话，也应先将导轨的辅助零件对正，再对导轨进行装卸

4、 The slider on the guide rail cannot be loaded and unloaded at will. If it is necessary to load and unload, the auxiliary parts of the guide rail shall be aligned first, and then the guide rail shall be loaded and unloaded

以上就是为大家介绍的有关导轨丝杠的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.jngongrun.com

The above is a detailed introduction to the guide screw, and we hope it will be helpful to you. If you have any questions, please contact us. We will provide you with our attitude http://www.jngongrun.com